4.8v Receiver Packs

Ripmax Hi Energy battery 1200Mah 4.8v Ni-Mh size 58mm x 50mm x 14mm

Ripmax Hi Energy battery 1200Mah 4.8v Ni-Mh size 52 x 28 x 28mm (square type).

Ripmax Sanyo 4.8v 1100mAh RX battery for Futaba. Size 52 x 28 x 28mm (square type).

Ripmax Hi Energy battery 2200Mah 4.8v Ni-Mh size 58mm x 50mm x 14mm

Ripmax Hi Energy battery 2200Mah 4.8v Ni-Mh size 52 x 28 x 28mm (square type).

Superb charge retention - 90% after 6 months, and 85% even after a year, so no need for regular charging to aviod permanent capacity loss required by many Ni-Mh cells

Due to this the cells/packs can be used immediately they are bought, and do not need charging first!

Much higher voltage under load, the voltage does not collapse when high currents are pulled, which is an unwelcome characteristic of normal AA Ni-Mh cells.

Over double the cycle life of most Ni-Mh cells, over 1,000 cycles are possible!

High quality 4.8V 2700mAh Sanyo Receiver Pack Flat configuration Ni-Mh.

Size 58 x 51 x 15mm

Ripmax Hi-Energy 4.8v 3300mAh Ni-MH Rx Pk Flat

Dimensions Length 90mm x Width 45mm x Depth 24mm

Hi-Energy 4.8v 5000mAh Ni-MH Receiver Battery Pack Flat Cell configuration with fast charge connector aswell as futaba plug.

Dimensions Length 93mm x Width 47mm x Depth 24mm