Battery checkers

• A Pocket Size Test Station With 7 Field Functions
• Battery Checker - 2-8s Lipo/LiFe/Lilon
• Battery Internal Resistance
• Watt Meter - 100A
• Optical Tachometer - 1to5 Blade (1 - 600,00)
• Temperature Gauge
• Servo Tester
• Thrust Calculator

More Info...
Instructions

Intelligent voltage detection system which is easy to install.

Features:

• Selectable low voltage detection for 2-cell, 3-cell, 4-cell Li-Po battery packs.
• Selectable low voltage detection for 4-cell, 5-cell Ni-Cd and Ni-MH RX packs
• Dual (light signal, alarm) low voltage warning, easy to know the batteries state
• Operate voltage: 4V-16.8V
• Power consumption current: 0.92mA
• Operate temperature: -20~ +85°C
• Dimensions: 40mm x 20mm
• Weight: 7 +- 1g

Instructions

On Board LiPo battery checker, ranges from 3.7v to 14.8v. See instructions for more.
Instructions

The Etronix Battery Doctor Balance/Discharger is designed for Li-Po and Li-Fe batteries. It can measure battery voltage precisely and balance each cells voltage of a battery pack or discharge batteries in preparation for storage.

You can observe each cells voltage in the battery pack individually. This helps identify abnormal or failing cells during the charging or discharging process.
Balancing V Discharging

Digital lithium battery capacity checker with advanced monitoring features such as battery capacity, highest and lowest cell voltage for LiPos detailing voltage gap between cells.

Instructions

This simple to use battery checker is designed to be fitted permanently into a model where the LED sequence allows you to monitor the voltage of your on-board NiCd and NiMH batteries

This simple to use Battery Load Tester is designed to connect to the charge lead from the receiver switch to check your models Ni-Cd or Ni-MH battery condition under a load. It will apply a load of 500mA to a 4.8v battery or 600mA to a 6v battery.

The BR-2000 is possibly the most effective receiver battery checker available. Able to check and discharge 4.8, 6.0, 7.2 volt batteries. Click details for the full spec

Details

The new Futaba BR-3000 Battery Checker is a sophisticated unit that can be used to check a wide range of battery packs of varying voltages, with Li-Po, Li-Fe and Li-Ion packs of 2-7 cells, and Ni-MH and Ni-Cd packs of 4-7 cells all being suitable for checking with the BR-3000.
More...