Futaba / Savox Servo Arms - Metal and Plastic

Pack of 4 Futaba horns type A,

Pack of 4 Futaba horns type B

Pack of 4 Futaba horns type C

Pack of 4 Futaba horns type D

Pack of 4 Futaba horns type E

Pack of 4 futaba servo horn large size disc 45mm dia

Pack of 4 futaba servo horn large size

Pack of 4. This arm fits a standard futaba servo and is approx 40mm long.

Longer servo arms are proving so popular that we have added this double arm for more precise control. Fits Futaba servos. Pk4

Longer 35mm half servo arms. Fits the Futaba servos. Pack 6

Use these horns to eliminate possible flexing that standard plastic horns can suffer from.

Suitable for large models and helicopters

Full arm, M2 threaded holes x 45mm wide

Use these horns to eliminate possible flexing that standard plastic horns can suffer from.

Suitable for large models and helicopters

Full arm, M3 threaded holes x 45mm wide

Use these horns to eliminate possible flexing that standard plastic horns can suffer from.

Suitable for large models and helicopters

Half arm, M2 threaded holes x 20mm wide

Use these horns to eliminate possible flexing that standard plastic horns can suffer from.

Suitable for large models and helicopters

Half arm, M3 threaded holes x 20mm wide

Use these horns to eliminate possible flexing that standard plastic horns can suffer from.

Suitable for large models and helicopters

Full arm, M3 threaded holes x 85mm wide

Use these horns to eliminate possible flexing that standard plastic horns can suffer from.

Suitable for large models and helicopters

Half arm, M3 threaded holes x 42mm wide

Specification
• Accurate attachment to the spline- Insures no slop surface movement
• Spline-Loc insures a no-worry connection to the servo locks in place two ways, at the spline and with the servo attachment screw
• Black powder coated finish- Maintains a quality look and finish
• Distance from the centre to the outer holes is 1" and the distance to the inner holes is 0.75

Specification
• Accurate attachment to the spline- Insures no slop surface movement
• Spline-Loc insures a no-worry connection to the servo locks in place two ways, at the spline and with the servo attachment screw
• Black powder coated finish- Maintains a quality look and finish
• Distance from the centre to the outer holes is 1.5" and the distance to the inner holes is 1.25"

Specification
• Accurate attachment to the spline- Insures no slop surface movement
• Spline-Loc insures a no-worry connection to the servo locks in place two ways, at the spline and with the servo attachment screw
• Black powder coated finish- Maintains a quality look and finish
• Distance between outer holes is 3" and the distance between the inner holes is 2.5"