Handy Items

This lighting set has been designed for use in aircraft and helicopters and features beacon, navigation and strobe lighting. A great way to add a level of scale realism to your models and it is extremely easy to install. Using long life, super-bright (3 & 5mm diameter) LEDs, you won’t fail to see any model they’re installed in! All LEDs or LED combinations have separate plugs fitted, so can be moved around for different lighting combinations!
More...

Great Planes Bench Topper organiser is a great way to store your tools and accessories needed for building rc aircraft. It can be wall mounted or sit it on your bench. Easy to assembly with the pre die cut parts. Tools not included.

Good balance makes trainers more stable, low wing aerobats more agile, and pylon planes faster than ever. With the easy to use C.G. Machine Aircraft Balancer, it's simpler to achieve optimum balance without measuring/marking and without the built in errors that fingertip balancing can create. Slanted wire balancing posts can support models up to 18Kg/40lbs. Make sure your models are perfectly balanced.

This 4 in 1 meter measures the exact surface throw to 1/10th of a degree, meaasures the wing and tail incidence, can attach it to the prop hub to measure the thrust angle and can even use it as a precision level.

• Easily Measures Control Throws
• Incidence attachement allows precise digital measurement of wing, tail and thrust angles
• Clamps firmly and evenly to most control surfaces
• Reset "zero" at any angle - no need to level the airplane
• Hold function allows the last reading to be stored
• 18" bar included

High quality futaba baseball cap with adjustable back band

A low cost digital optical tachometer that is suitable for two or three blade propellers. Simply point at the spinning prop and read the engine rpm from the large LCD screen.

9v dry battery included

Details

If you've ever damaged a wing when the screwdriver slips out of the head of the bolt, you'll appreciate these wing bolts as they feature handy finger grips to avoid this situation. Supplied complete with threaded side mounting nylon brackets. M6 x 35mm

Wing Bolt with bracket M6 pk2

Pair of brass latches which can have many uses in aircraft, boats and cars. The smaller one being very good for electric model planes. Overall length of the unit is approx 21mm, with the brass mount cylinder being 14mm long, the diameter of the brass unit iws approx 4.5mm

Pair of brass latches which can have many uses in aircraft, boats and cars.

Simple nylon catch for hatches that twists through 90 for a quick release. The countersunk head is very unobtrusive on the model and is easy to use with a standard flat head screwdriver.

A simple way of adding weight to any model. Perfect for correcting CG problems. In blocks of 5g & 10g (60g per strip x 3, 180g in total)

Magnets suitable for securing doors, hatches, canopies and cowls in all types of scale or sport models, sold as a pair, size of each magnet is 7mm x 5mm x 1.7mm, small but very strong. material nickel

Tube packing for the Receiver 200mm long by 60mm Dia

Ideal for around the tank bay and inside the radio area.

Three to each pack size approx 100 x 100 x 20mm

Receiver / Battery protection pack, roll the dense (7mm) foam rubber padding to fit your receiver then retain with the velcro strap. Size of foam 300mm x 70mm velcro strap 330mm x 25mm

Glider tow hook standard (50mm long)

This releasable tow hook is very popular and has been fitted to many gliders for aero towing. The centre cylinder of the assembly is retracted by the release servo which causes the ball ended attachment trace to be released.

A pack of three gyro mounting pads specifically designed for Futaba gyros. Their closed cell foam structure offers the right amount of damping, also with strong adhesive.

size 30 x 30 x 3mm

Also ideal for mounting Futaba 2.4ghz receivers.

Radio Active's servo mount bracket converts just about any servo from beam to side wall fixing. Neat, light and very practical. Suitable for most small and medium servos.

Details

Pack of 6 safety leadlocks, essential for extension leads and battery connections.

Great Planes engine mount hole locator. Automatically centres itself in the mounting hole.

Details

Fantastic hinge slotting kit. with center marker, guides and slotting fork

Swivel head pin vice with 2 double end collets capacity 0 - 3.175mm (0 to 0.125")

4 in 1 ball and clevis driver tool.

Details