Power Supplies, Chargers and Balancers

Pro-Peak have an enviable reputation for producing feature packed products that offer truly outstanding value! The brilliant new Sigma II EQ charger is no exception. This high performance, micro-processor controlled, fast charger/discharger has a built-in Lithium balancer. It's perfect for charging Li-Ion, Li-Po, Li-Fe, Ni-MH, Ni-Cd and Lead Acid batteries from either a 10~18.0v DC power source or a 240v AC supply.
More Info

Features

Input Voltage: 220~240V AC

Output Voltage: 13.8V DC Regulated

Current Rating: 0~20 Amps

Output Connections: 4mm Banana Sockets / Clamps

Specifications

TWIN OUTPUTS allow you to connect two chargers at the same time

High maximum current of 20 Amps

Switch mode technology

Regulated and very smooth output current

The Power Supply can be used with almost all DC chargers on the market

The LED screen shows the actual current being supplied

Larger Pic

The new Pro-Peak 4 output delta peak charger can simultaneously fast charge a transmitter and up to three receiver packs. Also incuded are adaptors to charge either Futaba or JR transmitters.

Input Voltage: 110 - 240V AC

Tx Output: 4 - 8 Cell Ni-MH / Ni-Cd (4.8 - 9.6V) 600mA

3 Rx Outputs: 4 -7 Cell Ni-MH / Ni-Cd (4.8 - 8.4V) 600mA

Programmable Charger, Discharger and cycler

With an integrated JST-EH balancer port with adaptor boards for Flight Power/Thunder Power & JST XH

AC & DC Input

Details

Programmable Charger and Balancer

With an integrated JST-EH balancer port with adaptor boards for Flight Power/Thunder Power & JST XH

AC-DC input

Details

Programmable Charger and Balancer

With an integrated JST-EH balancer port with adaptor boards for Flight Power/Thunder Power & JST XH

DC input

Details

Ni-Cd/Ni-MH 4~8 Cells (auto detected)

User selectable, max 40w

Charge Rate Trickle automatic

AC input 100-240V

DC input 11~15V

Programmable Charger AC-DC input

A high quality mains input charger suitable for all lead acid batteries.

12 volt batteries of 5-10Ah

Over-tec Lipo Smart Auto Balancer 2 - 6 cells

Balances up to 6 Lipo cells. Compatible for connecting with the Tornado Professional range & an extra lead is supplied for connecting with many over types of lipo batteries

Last one left

Details

This 240v mains input is suitable for use with all current Futaba sets (except the 14MZ Tx)

Nicad and Nickel Metal Hydride charger 70/70mAh.

For other charger types, see the charger & electrical section

This 240v mains input is suitable larger capacity batterys. For use with all current Futaba sets (except the 14MZ Tx)

Nicad and Nickel Metal Hydride charger 150/150mAh.

For other charger types, see the charger & electrical section

Includes Futaba and JR/Spektrum adapter Lead

Input 110-240v 50/60Hz

Outputs

1x RX 4.8 to 8.4 at 600mah delta peak cut off

1x TX 9.6v at 120mah delta peak cut off

Compatible for connecting the EQ5 / EQ6 balancer with Flight Power & Thunder Power Lipo packs

Compatible for connecting the EQ5 / EQ6 balancer with many Chinese Lipo battery packs, such as Tornado Professional & Align etc

Compatible for connecting the EQ5 / EQ6 balancer with Graupner Multiplex Robbe Lipo packs

Connects the new adaptor boards to the EQ-6 balancer