| It’s perfect for charging Li-Ion, Li-Po, Li-Fe, Ni-MH, Ni-Cd and Lead Acid batteries from a 10~18.0v power source. With a maximum internal circuit power of 200W and a variable charge current of up to 10.0A, the Warrior EQ is a versatile and easy-to-use unit. With charging and discharging cycles, 5 regime memories, a storage setting for Lithium packs and much more, the Warrior EQ does just about everything a modeller could need. Supplied with built-in XH balance ports and TP adaptor board to suit Impulse, Flight Power, Thunder Power and many other batteries with optional EH and PQ boards also available. The Warrior EQ can be further enhanced with an optional temperature sensor or USB link for your home PC.With a high quality metal case with integral heatsinks and fans for even better cooling!• Input Voltage: 10.0~18.0v• Circuit Power: Charge 200W max (25W discharge)• Charge Current: 0.1~10.0A• Discharge Current: 0.1~5.0A• Current Drain (for balancing): 200mAh/cell• Ni-MH/Ni-Cd Cell Count: 1~18 cells• Li-Po/Li-Ion/Li-Fe Cell Count: 1~6 cells• Pb Battery Voltage: 2~24vWith 200W of power available, the use of the Twins adaptors makes charging two (2S or 3S) packs at good currents readily achievable. |
