| This receiver from Futaba differs from the previous 14ch receiver because it can run on 2 modes. There is a "Normal Mode" where the receiver works like all previous Futaba 2.4 GHz receivers but there is also a "High Speed" setting with high resolution for the demanding modeller.The "Normal Mode" accepts any type of servos or the peripherals as the frame rate of the output is 14ms. The "High Speed mode" only accepts digital servos (including BLS series).The frame rate of the High Speed Mode outputs are 7ms (twice the standard speed). The outputs for other channels allow the use of any type of servos as the frame rate of these outputs are still 14ms on the High Speed mode. |
