Propellers & Spinners

Precision Engineered Propeller and Wheel balancerMade from 6061 High-Grade1 Alloy and Fully Ball RacedBall Bearings x 4Shaft size 3mmHub Size - up ...

Carbon fibre prop balancer that uses magnetic suspensionL55 x W44 x H52mm

This spinner adaptor nut has an 1/4" UNF thread to fit to the engine or motor shaft and an M4 threaded hole at the front to accept the spinner bolt.M4...

This spinner adaptor nut has an 1/4" UNF thread to fit to the engine or motor shaft and an M5 threaded hole at the front to accept the spinner bolt.Th...

This spinner adaptor nut has an 5/16" UNF thread to fit to the engine or motor shaft and an M5 threaded hole at the front to accept the spinner bolt.M...

This spinner adaptor nut has an M5 thread to fit to the engine or motor shaft and an M3 threaded hole at the front to accept the spinner bolt. This sh...

This spinner adaptor nut has an M6 thread to fit to the engine and or motor shaft an M3 threaded hole at the front to accept the spinner bolt. This sh...

This spinner adaptor nut has an M6 thread to fit to the engine or motor shaft and an M4 threaded hole at the front to accept the spinner bolt. This sh...

This spinner adaptor nut has an M7x1 thread to fit to the engine or motor shaft and an M4 threaded hole at the front to accept the spinner bolt. This ...

This spinner adaptor nut has an M8x1 thread to fit to the engine or motor shaft and an M4 threaded hole at the front to accept the spinner bolt. This ...

This spinner adaptor nut has an M8x1.25 thread to fit to the engine or motor shaft and an M4 threaded hole at the front to accept the spinner bolt. Th...

This spinner adaptor nut has an M10x1 thread to fit to the engine or motor shaft and an M4 threaded hole at the front to accept the spinner bolt. This...

SpecificationMotor Shaft Size - 2.00mmProp Shaft Size - 5mmSpinner Length - 13.0mmMax Prop Thickness - 8.0mm

SpecificationMotor Shaft Size - 3.17mmProp Shaft Size - 6.5mmSpinner Length - 19.0mmMax Prop Thickness - 11.0mm

SpecificationMotor Shaft Size - 4.00mmProp Shaft Size - 6.0mmSpinner Length - 19.0mmMax Prop Thickness - 11.0mmThese are manufactured from aluminium, ...

This spinner adaptor nut has an 5/16" UNF thread to fit to the engine or motor shaft and an M4 threaded hole at the front to accept the spinner bolt.M...

SpecificationMotor Shaft Size - 2.00mmProp Shaft Size - 5mmTotal Length - 23.0mmMax Prop Thickness - 8.0mm