RCW

This tool takes the hassle out of screwing threaded metric studs into snakes. To use, simply thread your stud or rod into either the M3 or M2 threaded...

4 Meters of Closed Loop Wire0.5mm DiameterNylon CoatedStainless Steel WireAlso ideal for rigging wire and nose wheel steering.

5 Meters of Closed Loop Pull Pull 1mm diameter wireAlso ideal for rigging wire and nose wheel steering.

10 Meters of Closed Loop Pull Pull 1mm diameter wireAlso ideal for rigging wire and nose wheel steering.

Close Loop Crimps 1.2mm IDLength 10mmIdeal for 0.5mm Wire

Close Loop Crimps 1.2mm IDLength 10mmIdeal for 0.5mm WireBulk Pack 50

Pk10 M2 Close Loop ConnectorsLength 22.5mmThread M2Thread Length 11mm

Pk10 M3 Close Loop ConnectorsLength 25mmThread M3Thread Length 13mm

Heavy Duty Crimps Small Pk20Ideal for large closed loop and rigging wireWidth Hole for wire 1.7mmLength Hole for wire 3.4mmLength 6mm

Heavy Duty Crimps Medium Pk20Ideal for large closed loop and rigging wireWidth Hole for wire 2.5mmLength Hole for wire 3.6mmLength 7mm

Heavy Duty Crimps Large Pk20Ideal for large closed loop and rigging wireWidth Hole for wire 2.7mmLength Hole for wire 5.4mmLength 9mm

M2 Black Plastic Clevis Pk10

Pk10 Nylon Clevis M2Total Length 29.5mmWidth 4.6mmHeight when clipped 6.4mmSuitable for M2 Threaded rods

M2 Metal Clevis pack of 2 for use with M2 rods

RC World's M2 Metal Clevis's Pk10

These clevis have an M2 threaded hold and use a pin and snap ring to fix through a hornLength 24mmThread M2Pin diameter 2.95mmPin Length 8.5mmGap for ...

These clevis have an M3 threaded hold and use a pin and snap ring to fix through a hornLength 24mmThread M3Pin diameter 2.95mmPin Length 8.5mmGap for ...

These clevis have an M4 threaded hold and use a pin and snap ring to fix through a hornLength 24mmThread M4Pin diameter 2.95mmPin Length 8.5mmGap for ...

RC Worlds M2 Solder Extenders Pk10Solder on to 2mm rods to provide an M2 threaded end.Internal diameter approx 2.1mmOutside diameter of solder socket ...

RC Worlds M3 Solder Extender in a pack of 4, to be soldered onto a M3 pushrod (2.7mm od) or bowden cable.Outside diameter of solder socket 3.5mm

RC Worlds M3 Solder Extender in a pack of 10, to be soldered onto a M3 pushrod (2.7mm od) or bowden cable.Outside diameter of solder socket 3.5mm

M3 Metal snap links pack of 10 for use with M3 push rods

One pair of stainless steel control horns designed to be mounted together with the ball link in the middle to spread the load over the surface.Ideal f...

Pk5 Nylon Control Horns With 2.2x16mm ScrewsHorn Height 27mmDistance to holes from base - 11mm 15mm 19.5mm 23.5mmBase 18mm x 13.5mmScrew Length 16mm

V Tail Horn SmallA very Compact Horn with the vertical leg at approximatley 30 degrees.Includes fixing plates and mounting screws. 1 pair per packHeig...

V Tail Horn LargeA very Compact Horn with the vertical leg at approximatley 30 degrees.Includes fixing plates and mounting screws. 1 pair per packHeig...

Mini Hinges Pk10Total Length 26mmWidth 11mmLength to hinge 11mmThickness 0.8mmThickness at hinge 2.3mm

Standard Hinges Pk10Total Length 29mmWidth 16mmLength to hinge 13mmThickness 1mmThickness at hinge 2.4mm

Large Hinges Pk10 20x38mmTotal Length 38mmWidth 20mmLength to hinge 13mmThickness 1mmThickness at hinge 2.9mm

Nylon Pin Hinge 3 x L48mm Pk103mm Diameter48mm Long

Nylon Pin Hinge 4.5 x L68mm Pk104.5mm Diameter68mm Long

Pushrods 500mm 1.5mm diameter Pk4 with connectors500mm long pushrods with a Z bend on one endSupplied with 1.6mm Connectors to fit to a servo or contr...

RC Worlds 8" M2 Threaded Control Rods in Pk10M2 thread on one end 20mm longPlain shank diameter 1.8mm

Heavy duty, high quality steel Z bender for making 90deg Z-Bends on up to 2mm wire.The finest tool yet devised for putting Z-bends into control rod wi...