Power Supplies, Chargers and Balancers

Tired of charging one battery at a time? Try the PowerPal 4! This charger allows you to plug 4 batteries into one charger simultaneously, and it will intelligently and automatically charge all 4 of them at once to their maximum capacity. To top it off, the batteries being charged do not even need to have the same configuration. You can connect different types NiMH/Ni-CD/LiPo/LiFe batteries into any of the charging ports.
More...

Pro-Peak have an enviable reputation for producing feature packed products that offer truly outstanding value! The brilliant new Warrior EQ charger is no exception. This high performance, high power, micro-processor controlled, fast charger/discharger has a built-in Lithium balancer.

Included with the charger is, a temperature sensor, usb lead to connect to the pc, Lipo adaptor boards TP/FP-02 and JST XH Adaptor, deans charge lead, futaba rx charge lead, charge lead with croc clips on, glow driver charge lead and a BEC connector charge lead.
More Details...

Recently upgraded to 6.0A charging and also comes with an array of charge leads.

Pro-Peak have an enviable reputation for producing feature packed products that offer truly outstanding value! The brilliant new Sigma II EQ charger is no exception. This high performance, micro-processor controlled, fast charger/discharger has a built-in Lithium balancer. It’s perfect for charging Li-Ion, Li-Po, Li-Fe, Ni-MH, Ni-Cd and Lead Acid batteries from either a 10~18.0v DC power source or a 240v AC supply.
More Details...

The PS200 twin is a regulated power supply that delivers 13.8V with twin outputs. With an LCD readout showing voltage and current, this twin power supply is ideal for someone wanting to power two chargers at the same time.

• Input Voltage: 220~240V AC
• Output Voltage: 13.8V DC Regulated
• Current Rating: 0~15 Amps
• Output Connections: 4mm Banana Sockets / Clamps

The PS200 Adjustable is a regulated 5~15V power supply with current limiting from 0~15A. With an LCD readout showing the voltage and current being supplied, it can also be used to charge Lead Acid batteries.

• Input Voltage: 220~240V AC
• Output Voltage: 5-15V DC Regulated
• Power 200 watts
• Current Rating: 0~15 Amps Adjustable
• Output Connections: 4mm Banana Sockets / Clamps
• Backlit LCD

The new Pro-Peak 4 output delta peak charger can simultaneously fast charge a transmitter and up to three receiver packs. Also incuded are adaptors to charge either Futaba or JR transmitters.

• Input Voltage: 110 - 240V AC
• Tx Output: 4 - 8 Cell Ni-MH / Ni-Cd (4.8 - 9.6V) 600mA Delta Peak
• 3 Rx Outputs: 4 -7 Cell Ni-MH / Ni-Cd (4.8 - 8.4V) 600mA Delta Peak

RX Ni-Cd/Ni-MH - 4~6 Cells (Delta Peak) TX Ni-Cd/Ni-MH - 4~8 Cells (Constant Current) AC Input - 110~240V.

RX Output Delta Peak (750mA) RX Socket - fits both Futaba and JR 4~6 Cells Tx Output

Fixed Constant Current (150mA) Detachable Plug for both Futaba and JR / Spektrum 4~8 Cells

Includes Futaba and JR/Spektrum adapter Lead

Input 110-240v 50/60Hz

Outputs

1x RX 4.8 to 8.4 at 600mah delta peak cut off

1x TX 9.6v at 120mah Constant Current

Originally developed for use with the 8FG and 12FG radios, the new FBC35D/4 charger has a 7.2v 170mAh output for the Tx battery and a 600mA 4.8-8.4v delta peak terminated output for the Rx battery pack, and can be used for both Ni-Cd and Ni-MH battery packs.

Features

•Built-in intelligent balancing circuit is designed to individually balance each cell on a lithium battery pack within the tolerance of 5mV during charge.

•Balancing plug adaptor boards are supplied to suit FlightPower, Thunder Power and JST-XH batteries. Optional adaptors for Polyquest & 4/2mm plug car packs are available.

•2 line, 8 character, LCD makes the screen clear and legible.

•Monitoring features allow the monitoring of capacity, peak voltage and individual cell voltages (Lithium only) on the screen during and after charging.

•Various warning messages for incorrect input voltage, wrong connections, unsuitable battery condition and reverse polarity on output.

Details

Features

•2 - line, 16 character, blue backlit, LCD makes the screen extremely clear and legible

•Built-in intelligent balancing circuit is designed to individually balance each cell on the connected lithium battery pack within the tolerance of 5mV during charge or discharge

•Balancing plug adaptor boards are supplied to suit JST XH, FlightPower and Thunder Power batteries. Optional adaptors for Polyquest are available

•Voltage monitoring feature shows each actual cell voltage on the screen during balancing

•Various warning messages for incorrect input voltage, wrong connections, unsuitable battery condition and reverse polarity on output

Details

A high quality mains input charger suitable for all lead acid batteries.

12 volt batteries of 5-10Ah

AC input 220-240V. Charge Rate 700mah. SLA output Voltage 12v

A basic mains charger for either 2 or 3 cell Li-Po packs with built in balancing system. Compatible with XH and TP balance plugs and has a fixed 650Mah charge rate

This is a charger designed for Lithium based batteries only, but copes with Li-Ion, Li-Po and Li-Fe technologies with a regime specific for each. The built in balancer can work on 2, 3 or 4 cell packs that have a cell voltage variation other chargers might not like. It will also charge single cells. The charge current can be varied from 0.1A to 3.5A in 0.01A increments using the large LCD display screen.Those small increments are particularly useful for the latest generation of indoor models with small Li-Po packs.
More...

AC input 220-240V. NiCad /NiMH 4-8 cells. Charge Rate 1A Delta Peak

Compatible with all Fusion chargers. This FlightPower/Thunderpower adapter board allows the connection of 2-6 cell FlightPower/Thunderpower type balancing leads.

N.B. This board requires a balance adaptor board lead to connect to a charger/balancer.

Compatible with all Fusion chargers. This Polyquest adapter board allows the connection of 2-6 cell Polyquest type balancing.

N.B. This board requires a balance adaptor board lead to connect to a charger/balancer.

Compatible with all Fusion chargers. This JST-EH adapter board allows the connection of 2-6 cell JST-EH type balancing leads.

N.B. This board requires a balance adaptor board lead to connect to a charger/balancer.

Compatible with all Fusion chargers. This JST-XH adapter board allows the connection of 2-6 cell JST-XH type balancing leads.

N.B. This board requires a balance adaptor board lead to connect to a charger/balancer.

Compatible with all Fusion chargers. This JST-XH adapter board allows the connection of 2-7 cell JST-XH type balancing leads.

N.B. This board requires a balance adaptor board lead to connect to a charger/balancer.

This balance board allows you to balance two identical packs of 2 or 3 cells at the same time, through a 6 cell balancer/balanced charger. The board allows you to charge/balance the following pack configurations at the same time:

• 2 x 2 Cell XH
• 2 x 3 Cell XH
• 2 x 2 Cell TP (Thunder Power, Flight Power)
• 2 x 3 Cell TP (Thunder Power, Flight Power)

Instructions

Balance Board Adaptor Lead 6 Cell 250mm Long for up to 6 cell boards