1. Home
  2. Login
  3. Order Status
  4. View Basket
  5. Checkout

Zenoah Engines

Zenoah 26 Titan ZG 26SC Petrol Engine

Zenoah 26 Titan ZG 26SC Petrol Engine

Zenoah Titan ZG 26SC Petrol engine with magneto ignition


Capacity: 25.4 ccm

Bore: 34 mm

Stroke: 28 mm

Effective compression ratio: 8.8

Power: 2.2 hp with tuned pipe:3.0 hp

Weight:1425g less muffler and motor mount.


Walbro pump carburettor with choke and intake trumpet.

New cylinder for considerably more power and efficient cooling.

Very thin piston ring for minimal friction and maximum power.

Magneto-electronic ignition with separate power coil and ignition coil, giving maximum power and smooth running.

Small Champion spark plug RZ7C with 10 mm thread.

Compact diecast crankcase.

Double counterbalanced crankshaft, supported in three ballbearings. Needle roller bearings in conrod.

The Titan ZG 26SC is supplied with muffler, intake tube, carburettor servo linkage, motor mount and spark plug box spanner. The very detailed instructions provide the newcomer to petrol engines with a great deal of information and tips.

Recommended propellers are the Menz wood or Master Airscrew range 18x8", 18x6" and the 17x8".

A 500 cc tank with a cotton felt filter and fuel tubing is all you require to get in the air!

Use fully synthetic 2 stroke oil with unleaded petrol at a ratio of 50:1

Price: £249.99

Zenoah 62 Titan ZG62 SL Petrol Engine

Zenoah 62 Titan ZG62 SL Petrol Engine

The Zenoah 62 is very popular engine for scale aircraft requiring a 60cc engine. The very wide and cleanly formed cooling fins allow the use of large propellers causing the motor to turn at relatively low speeds. For aerobatic aircraft the 22x10" or the 22x12" Menz S propeller has proved to be very good or aircraaft such as glider tugs typically flies best with the 24x10".

If you wish to, or must, reduce the engine noise, you can pull the intake air out of the fuselage by fitting a 90 degree bend between the carburettor and motor. The intake noise is louder than the noise from the standard silencer. This bend by lengthening the intake tract allows the fitting of a 24x12" or 26x10" Menz S propeller, of course you are not going to get the maximum power from the motor by this method.

The ZG 62 SL is delivered complete with silencer, fitted with 40 mm prop hub, but without motormount.


Capacity: 62 cc

Bore: 47,5 mm

Stroke: 35 mm

Power: 4,3 hp

with tuned pipe: 6,6 hp

Weight: 2040 g without silencer and engine mount

Price: £365.00

Recently Viewed