Electrospeed Boost 50 Power Pack Motor and ESC Combo
1 x Electrospeed 5045/10 720KV Brushless Outrunner Motor.
1 x Electrospeed XP2 80A SBEC Brushless ESC.Brushless Outrunner RC Motor - Electrospeed 5045/10 720KV
The sheer power of Electrospeed brushless motors far exceeds many motors costing 2 - 3 times their price. All of the Electrospeed motors are manufactured to demanding standards, using the finest quality components. Our High Tech manufacturer uses state of the art CNC machine tools, giving the unique Electrospeed design, this design means a lower weight motor with our black finish for better heat dissipation.
Every component of the motors are manufactured from the highest quality materials, only the best Neodym magnets are used along with special high temperature wire for windings, giving these motors reliability normally associated with much more expensive products.
Electrospeed motors are designed to provide reliable power for your model at respectable prices, a total performance package when used in conjunction with our XP2 Speed Controllers.Technical Specification
KV: 720 rpm/v
Compatible with: 3-8S LiPo / 10-22S NiMH
Idle Current: 1.7
Recommended ESC: 80A
Propeller Size: from 12x6in to 14x8in*
Shaft Diameter: 6mm
Weight: 188g (excluding accessory kit)
Connectors: 4mm gold connectors
*NOTE: Propellers should always be checked with a Watt Meter to determine the correct diameter and pitch.
Electrospeed XP2 80A SBEC Brushless ESC - RTF SPEED Controller
Fitted with Deans connector for the battery and 4mm gold connectors for the motor.
This series of speed controllers have high technology and perfect function. Aimed at none-hall, direct current brushless motors, several parameters can be set through a programming card or key on the ESC and are convenient to USE.XP2 SBEC 80A Brushless Speed Controller Features:
Full protection feature including low voltage, over-heat, throttle signal loss, startup protection and self-check.
Compatible with most sensor less brushless motors.
Excellent startup performance, linear throttle and quick throttle response.
Highest motor speed supported 210,000RPM (2 poles), 70,000RPM (6 poles) and 35,000(12 poles).
Easily configured using a programming card.
System can automatically detect throttle neutral point.
3 timing modes can match different motors.
3 modes of start force adjustment.
Governor mode for heli
Reverse motor directionSpecification
Low resistance PCB
Input Voltage: 5.5V - 26V (Support 2-6 Lithium Batteries, 5-18 Nimh)
Continue current: 80A, (Burst max 100A 10 secs)
BEC output: 5A/5V
Dimensions: 86 x 38 x 12 mm
Blue Motor Wire 14AWG
Red and Black Battery Wire 12AWG
Fitted with 4mm gold connectors